B&G ZG100 GPS Antenna with Integrated Compass

The B&G ZG100 GPS antenna provides precise and dependable position data making it the perfect partner for B&G chartplotters and instrument systems.

The highly accurate 10 Hz GPS gives precise and smooth update of position information during acceleration and manoeuvring, rapid signal acquisition and consistent position accuracy augmented by secondary satellite systems like WAAS, EGNOS, MSAS and Galileo. It is also QZSS-ready.

The integrated compass delivers accurate heading information for instruments, chart stabilisation for Head Up mode and Radar overlays. It also provides Heel and Trim data for sailing.

Please note this product is not suitable for use with MARPA or B&G Pilot systems; this requires a rate compass such as the Precision-9, RC42 or Halcyon Gyro-Stabilised Compass.

Details:

• Highly accurate position
• 10Hz update rate
• Sail Specific COG/SOG filtering for optimum performance
• GPS/Galileo support
• Augmented with WAAS, EGNOS and more
• Integrated heading sensor
• Heel & Trim sensors
• Compact, waterproof (IP67) design
• NMEA 2000®

Especifications:

Approvals

Compliance	CE under RED 2014/53/EU Directive

Connectivity

N2K PGNs	126992, 129025, 129026, 129029, 129539, 129540, 127258, 127250, 127251, 127257
NMEA 2000	1x NMEA 2000 Micro-C port, 2 LEN

Electrical

Power Consumption, max.	2 W
Power Consumption, typical	< 2 W
Supply Voltage	9 V DC – 18 V DC
Humidity	40ºC, 93% RH, operating

Environment

Operating Temperature Range	-25°C to 60°C (-13°F to 140°F)
Storage Temperature Range	-40 to + 85ºC (-40 to + 185ºF)
Waterproof rating	IPX7

GPS

Correction	DGPS, WAAS, EGNOS, GLOANASS, MSAS, Galileo
GPS Receiver Channels	32 Channels
Position Accuracy	3m (9.8 ft)
Time to First Fix	3s (Cold Start 50s)
Update rate	Up to 10 Hz (1,5,10)

Heading Sensor

Accuracy	+/- 3º Heading, +/- 1º Roll/Pitch @ 30º
Data Available	Magnetic, Heading, Rate of Turn, Heel Angle, Trim Angle
Data Protocol	NMEA 2000
Type	Solid state

MFD

Compass Safe Distance – Metric, imperial	0.5 m (20″)
Dimensions (Diameter x H)	91 x 38 mm (3.54″ x 1.50″)

Physical

Mounting Type	Flush mount / Standard Pole Mount
Weight	0.14 kg (0.3 lbs)

Other

Warranty Period	2 Years

Weight	0,7 kg
Dimensions	19,7 × 27,9 × 9,8 cm
Brand	B&G
Class Type	GPS
Component	Sensor/Transducer/Scanner/Antenna
Family	B&G Sensor – GPS
Item Type	Main Product
Model	B&G ZG100
sku	000-11048-002
GTIN	9420064118717

The following products are already included on the shipment when you buy this one:

Consider the following accessories when buying this product:

The following products are from the same Category as this one: